Tp Link Acces Point. CPE 510 Outdoor CPE 5GHz 300Mbps 13dBi
About this ítem
- Incorporates dual polarized directional 13dBi 2x2 MIMO antenna
- Adjustable transmission power from 0 to 27dBm / 500mw
- System-level optimizations for long-range wireless transmission over 15km
- TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) Technology improves product throughput, capacity and latency performance, ideal for PTMP applications
- Centralized Administration System - Pharos Control
- Operation modes, AP / Client / Repeater / AP Router / AP Client Router (WISP)
- Passive PoE adapter supports up to 60 meters (200 feet). Power over Ethernet implementation and allows device to be reset remotely
| HARDWARE FEATURES | |
|---|---|
| Processor | Qualcomm Atheros Enterprise AR9350B 560MHz CPU, MIPS 74Kc |
| Memory | 64MB DDR2 RAM, 8MB Flash |
| Interface |
1 Shielded 10 / 100Mbps Ethernet Port (LAN0, in Passive PoE) 1 Shielded 10 / 100Mbps Ethernet Port (LAN1, Passive PoE Passthrough) 1 Ground terminal 1 Reset button |
| Power supply |
Passive Power over Ethernet via LAN0 (+ 4.5pins; -7.8pins) Voltage Range: 16-27VDC |
| Energy consumption |
13 Watts Max Note: When implemented using passive PoE, the power drawn from the power supply will be higher by a certain amount depending on the length of the connection cable. |
| Dimensions (WXDXH) | 224 x 79 x 60 mm |
| Antenna Type |
2 Built-in 13dBi Directional Antennas with Polarized Dual Beam Width: 45 ° (H-Plane) / 30 ° (E-Plane) Note: For more details, read the data sheet |
| Protection |
15KV ESD Protection 6000V Lightning Protection |
| Enclosed |
Outdoor Stabilized ASA Plastic Material IPX5 Waterproof Certification |
| WIRELESS CHARACTERISTICS | |
|---|---|
| Wireless Standards | IEEE 802.11a / n (with Pharos MAXtream disabled) |
| Proprietary Protocol | TDMA mode (with Pharos MAXtream enabled) |
| Wireless Speeds |
Up to 300Mbps (40MHz, Dynamic) Up to 144.4Mbps (20MHz, Dynamic) Up to 72.2Mbps (10MHz, Dynamic) Up to 36.1Mbps (5MHz, Dynamic) |
| Frequency |
5.15 ~ 5.85GHz Note: The available operating frequency may vary depending on the limitations of the countries or regions in which the device is used. |
| Reception Sensitivity |
• 802.11a: 54M: -75dBm, 48M: -76dBm, 36M: -83dBm, 6-24M: -95dBm • 802.11n: MCS15: -73dBm, MCS14: -74dBm, MCS13: -76dBm, MCS12: -80dBm, MCS11 : -83dBm, MCS10: -88dBm, MCS9: -90dBm, MCS8: -93dBm, MCS7: -73dBm, MCS6: -74dBm, MCS5: -76dBm, MCS4: -80dBm, MCS3: -83dBm, MCS2: -88dBm : -90dBm, MCS0: -93dBm |
| Potency of transmission |
27dBm / 500mw (power adjustable by 1dBm) Note: The maximum transmit power may vary across different channels depending on the limitations of the countries or regions where the device is used. |
| SOFTWARE CHARACTERISTICS | |
|---|---|
| Wireless Settings |
Pharos MAXtream TDMA Technology 802.11a / n Modes Selectable Channel Width: 5/10/20 / 40MHz Automatic Channel Selection Power Control Transmission Dynamic Frequency Selection (DFS) WDS Enable / Disable Security: WPA / WPA2 Encryption, WPA- PSK / WPA2-PSK (AES / TKIP), Encryption 64/128/152-bit WEP SSID Broadcast Enable / Disable Multi-SSID with VLAN Tagging (AP mode only) Timeout Setting Distance / ACK MAC Address Filter Wireless Wireless Advanced: > Beacon Interval / RTS Threshold / Fragmentation > Threshold / DTIM Interval / AP Isolation / Short GI / Wi-Fi Multimedia |
| Administration |
Remote Discovery and Management via Pharos Control application HTTP / HTTPS based management System Log SNMP Agent (v2c) Ping Watch Dog Dynamic DDNS SSH Server |
| System Tools |
Wireless Signal Quality Indicators: Signal Strength / Noise / Transmission CCQ / CPU / Memory Monitors: Throughput / Stations / Interfaces / ARP / Routes / WAN / DHCP Spectrum Analyzer Speed Examination Ping Traceroute |
| System Level Optimizations |
IGMP Optimized / proxy for multicast applications Hardware watch dog |